CAD (0)
  • Cart is empty
The Cash Acme EB-45 Double Union SharkBite Pressure Regulating Valve (EB45-DUSB) is a lead free* half-cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve.

The EB45-DUSB is assembled using modular construction methods and features union SharkBite connections in 1/2" through 1" sizes. Connect the SharkBite pressure regulating valve to copper tubing, and CTS CPVC and PEX in seconds with ease.

The EB45-DUSB is supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10-70 psi without changing the spring. This valve is intended for use where supply line pressure does not exceed 200 psi, and is suited for either cold or hot (to 180°F) water service.

Unit of Measure

Type

N/A Pressure Regulator

Connection Type

N/A Double Union SharkBite

Size

N/A 3/4"

Operating Temperature [Min]

N/A 33 ºF

Operating Temperature [Max]

N/A 93 ºC180 ºF

Operating Pressure [Max]

N/A 200 psi

Overall Length

N/A 7.05 in

Overall Height

N/A 5.12 in

B

N/A 4.37 in

C

N/A 0.75 in

Body Material of Valve

N/A Lead Free Bronze

Spring Chamfer Material of Valve

N/A Reinforced Engineered Polymer or Iron

Pressure Plate Material of Valve

N/A Steel (zinc plated)

Adjusting Spring Material of Valve

N/A Steel (zinc plated)

Hex Handle Material

N/A Metal - Cash Acme - Steel

Diaphragm Material of Valve

N/A Reinforced EPDM

Body Seat Material of Valve

N/A Polyphenylene Ether +PS

Seat Disc Material of Valve

N/A EPDM

Piston Material of Valve

N/A Stainless/Brass

Strainer Screen Material of Valve

N/A .Stainless Steel

O-Ring Material of Valve

N/A EPDM

Body Material of SharkBite

N/A Lead Free DZR Brass

O-Ring Material of SharkBite

N/A EPDM

Grab Ring Material of SharkBite

N/A Stainless steel

Tube support liner Material of SharkBite

N/A Polysulfone

Features and Benefits

N/A Modular Cartridge Design reduces the number of parts requiring service: Quick and Easy Service/Repair. Instant push-fit connections for increased ease of use: No soldering, glue or tools required to make connection. Rugged bronze body: Superior reliability, improved user safety. Compact pressure reducing valves: Smaller installation footprint and economically priced. Certified to ASSE Standard 1003, CSA Standard B356, and ASSE Standard 1061. Listed by IAPMO and ASSE and certified lead free complying with NSF 372: Inspector friendly for peace of mind. Back-pass check mechanism integral with the cartridge: No add-on or small parts, longer life and more reliable performance. Every valve is tested for performance prior to shipping: Specify and install with confidence. Assembled and tested in the USA: Prepared in our manufacturing plant in Cullman, Alabama

Specification

N/A A pressure regulating valve shall be installed to reduce high supplies of incoming water pressure. The valve shall be approved in accordance with ASSE standard 1003, CSA standard B356 and IAPMO UPC. The valve shall have a bronze body, brass and stainless steel internals, an EP diaphragm, stainless steel strainer screen, an inbuilt back-pass check, and integral SharkBite push-to-connect ends. The valve shall be used on copper tubing, and CTS CPVC and PEX. The valve shall be a Cash Acme EB-45 Double Union SharkBite Pressure Reducing Valve.

Certifications

N/A The Double Union SharkBite EB45 Pressure Reducing Valve is certified to standards ASSE 1003 and CSA B356 and is listed by ASSE and IAPMO (cUPC). The SharkBite push-fit fittings have been design certified and listed to ASSE 1061/NSF/ANSI 61, listed by IAPMO, and are certified for potable water distribution. The Double Union SharkBite EB45 Pressure Reducing Valve is compliant with NSF 372.

Service

N/A Potable water

Flow Configuration

N/A Directional Arrow

Factory Set

N/A 60 psi

Outlet Range

N/A 10-70 psi